PSU 美国苏威 M-2300 MR 注塑级 耐化学 纤维增强

Solvay Specialty Polymers Udel® M-2300 MR Polysulfone (PSU), Mold Release

Polysulfone (PSU)

Solvay Specialty Polymers

产品说明：

Udel M-2300 MR is an injection-moldable, low-color grade of polysulfone that is nearly water white in color. This material contains a mold release which aids part ejection when parts with low draft are injection molded.

Polysulfones have long been known for transparency and clarity, but have been somewhat limited by a slight yellow cast which has been typical of the material. These grades were designed to eliminate the yellow cast and provide improved aesthetics for applications where a yellow cast is undesirable.

In general, Udel polysulfone is a tough, rigid, high-strength, high-heat thermoplastic that retains its properties at temperatures from -101°C to 149°C (-150°F to 300°F). With a heat deflection temperature at 1.8 MPa (264 psi) of 174°C (345°F) and excellent thermal and oxidative stability, this resin is suitable for sustained use at temperatures up to 149°C (300°F).

Other key properties of polysulfone include resistance to hydrolysis by hot water and resistance to acids and bases. In addition, the resin is resistant to a wide range of cleaners and disinfectants. Polysulfone's resistance to alcohols and aliphatic hydrocarbons is also good; however, the resin is generally not resistant to polar organic or chlorinated solvents. Udel M-2300 NT MR also offers superior retention of properties after repeated steam sterlizations.

- Natural/Transparent: Udel M-2300 NT MR

Features: Acid Resistant; Alcohol Resistant; Alkali Resistant; Cleanable; Good Chemical Resistance; Good Sterilizability; Good Surface Finish; Good Toughness; High Clarity; High Heat Resistance; Hydrocarbon Resistant; Hydrolytically Stable; Steam Sterilizable

Uses: Medical/Healthcare Applications

Availability: Africa & Middle East; Asia Pacific; Europe; North America; South America

Information provide by Solvay Specialty Polymers